Home » Installation guide for PanzerGlass Samsung Galaxy S10 and Note10

Installation guide for PanzerGlass Samsung Galaxy S10 and Note10

The Samsung Galaxy S10, S10+, Galaxy Note10 and Note10+ use an ultrasonic fingerprint reader that is embedded into the screen. This uses soundwaves to create an intricate 3D map of your fingerprint.

In order to get full in-screen fingerprint functionality with PanzerGlassTM for Samsung Galaxy S10, S10+, Galaxy Note10 and Note10+ you need to install the glass correctly and further adjust the settings.

 

See the installation video:

 

This video shows installation on a Samsung Galaxy S10. The installation steps are the same for the Samsung Galaxy S10+ and the Note10 series.

 

Installation guide step by step:

  • After cleaning your device and removing the labelled “back”, carefully position the PanzerGlassTM with the loudspeaker “cut-out” in the top of the phone.
  • Afterwards you remove the film labelled “front” and use your finger/nail to press and remove air bubbles around the fingerprint reader. Our PanzerGlassTM has a thin silicone layer around the in-screen fingerprint reader combined with a stronger adhesive placed along the edges. End the installation by pressing the edges of the PanzerGlassTM to secure the glass fully.
  • Please also enhance the touch sensitivity settings and mind that the Samsung Galaxy S10, S10+, Galaxy Note10 and Note10+ enable you to install the same fingerprint more than once.

 

If you have any further questions to the installation or product, you are welcome to contact our Customer Care team on info@panzerglass.com

 

PanzerGlass S10 notification