PANZERGLASS SCREEN PROTECTOR INSTALLATION GUIDES

MAKE YOUR PANZERGLASS FIT PERFECTLY

A screen protector from PanzerGlass™ is easy to attach to your mobile device's screen if you follow the installation guides below. During the installation, please make sure that you are working in a dust free environment and avoid touching the adhesive side of the PanzerGlass.

How to install a PanzerGlass™ screen protector

  1. Clean your device's screen with the wet wipe in the package, and dry the screen with the microfiber cloth as the next step. Please make sure your device's screen is left free of dirt and fingerprints.
  2. Remove the film labelled ”back” from the PanzerGlass™.
  3. Carefully position the PanzerGlass above the device and make sure the holes of the PanzerGlass™ are aligned correctly with the device's screen before you place the PanzerGlass™ on top of the screen.
  4. Slide a finger down the middle of the PanzerGlass™ and let it attach itself to the device's screen.
  5. Remove the film labelled ”front” and clear any remaining air bubbles underneath the PanzerGlass by pushing them towards the edges using the microfiber cloth.
  6. If there are any remaining air bubbles, carefully lift the PanzerGlass™, without touching the adhesive side, and let it reattach itself again while pushing out the air bubbles.

 

How to install a PanzerGlass™ screen protector with dot technology

 

  1. Clean your device's screen with the wet wipe in the package, and dry the screen with the microfiber cloth as the next step. Please make sure your device's screen is left completely free of dirt and fingerprints.
  2. Remove the film labelled ”back” from the PanzerGlass™.
  3. Carefully position the PanzerGlass™ above the device and make sure the holes of the PanzerGlass™ are aligned correctly with the device's screen, before you gently press the PanzerGlass™ onto the screen
  4. Take extra care when pressing the PanzerGlass™ around the edges. Should you hear a clicking sound, when attaching the PanzerGlass™ to the device, gently remove the glass via the corners and re-apply.
  5. Remove the film labelled ”front” and clear any remaining air bubbles underneath the PanzerGlass™ by pushing them towards the edges using the microfiber cloth.
  6. If there are any remaining air bubbles, carefully lift the PanzerGlass™, without touching the adhesive side, and let it reattach itself again while pushing out the air bubbles.

 

Installing PanzerGlass™ on a tablet

  1. Clean your device's screen with the wet wipe in the package, and dry the screen with the microfiber cloth as the next step. Please make sure your device's screen is left free of dirt and fingerprints.
  2. Remove the film labelled ”back” from the PanzerGlass™.
  3. Carefully position the PanzerGlass™ above the device and make sure the holes of the PanzerGlass™ are aligned correctly with the device's screen before you place the PanzerGlass™ on top of the screen.
  4. Slide a finger down the middle of the PanzerGlass™ and let it attach itself to the device's screen.
  5. Remove the film labelled ”front” and clear any remaining air bubbles underneath the PanzerGlass™ by pushing them towards the edges using the microfiber cloth.
  6. If there are any remaining air bubbles, carefully lift the PanzerGlass™, without touching the adhesive side, and let it reattach itself again while pushing out the air bubbles.

 

Installing PanzerGlass™ PET-film/foil

  1. Clean your device's screen with the wet wipe in the package, and dry the screen with the microfiber cloth as the next step. Please make sure your device's screen is left free of dirt and fingerprints.
  2. Remove the film labelled ”back” from the PanzerGlass™ PET-film.
  3. Carefully position the PanzerGlass™ PET-film above the device and make sure the holes of the PET-film are aligned correctly with the device's screen before you place it on top of the screen.
  4. Slide a finger down the middle of the PanzerGlass™ and let it attach itself to the device's screen.
  5. Remove the film labelled ”front” and clear any remaining air bubbles underneath the PET-film by pushing them towards the edges using the microfiber cloth.
  6. If there are any remaining air bubbles, carefully lift the PET-film, without touching the adhesive side, and let it reattach itself again while pushing out the air bubbles.

 

Installing PanzerGlass™ on smart watches

Due to the curved nature of your watch's screen, please take extra care when applying this screen protector.

  1. Clean your watch's screen with the wet wipe in the package, and dry the screen with the microfiber cloth as the next step. Please make sure your watch's display is left free of dirt and fingerprints.
  2. Remove the film labeled “back” from the PanzerGlass™.
  3. Carefully position the PanzerGlass™ above the watch, before you place it on top of the screen.
  4. Press around the edge of your PanzerGlass™ and it will attach itself to the screen.
  5. Remove the film labelled ”front” and clear any remaining air bubbles underneath the PanzerGlass™ by pushing them towards the edges using the microfiber cloth.

 

Removing dust or impurities

Should you experience dust or impurities underneath your PanzerGlass after the installation, gently lift the PanzerGlass and use the dust remover sticker to clear the dust. Thereafter, you can reapply the PanzerGlass following the above steps.

For more installation videos